Easy and quick test to check your electric motors
This instrument presents an exciting breakthrough in off-line (de-energized) testing.
Within minutes the operator can get a complete picture of the condition of a motor without
having to stress-test the windings or use other more expensive or elaborate instruments.
No need to carry along hard to read user manuals
The unit can be used stand-alone or with software, which enables you to
see all the underlying data from the test. For accuracy see our specifications.
The static test
It can be performed at the control panel and takes only a
few minutes per motor! It tests “the whole loop”, i.e. cable, connections
and stator/rotor from the starter/motor drive. No need to disconnect drives and
machinery for the phase to phase test. It reports whether a change has occurred
between a prior test (the baseline) and the present test.
Two tests in one
The instrument can be used in two modes: Static and Dynamic. Both quickly
collect data in auto mode and there is no need to operate a lot of difficult to
understand buttons.
Dynamic test by rotating shaft
The AT33 IND Dynamic Test analyzes the results for you by showing Bad,
Warning or OK for Resistance, Stator, Rotor and Contamination. It is
developed for testing < 1000V induction motors with squirrel cage rotor
Accuracy and easy testing
The AT33 IND comes with high-quality test leads and 4 wire Kelvin Clips
for very accurate data collection. Please see specifications. The lithium batteries support more than 8 hours of continuous use.
.png)
.png)
.png)
.png)
.png)
.png)
Customer Service
1.888.467.7626